DDD

DDD

 

 

 

<img alt="Winstar 9 inch TFT LCD Module, 9" tft="" lcd"="" data-cke-saved-src="https://www.winstar.com.tw/uploads/editor/images/tft-lcd/tft-ips-display/WF90BTWAHLNN0.jpg" src="https://www.winstar.com.tw/uploads/editor/images/tft-lcd/tft-ips-display/WF90BTWAHLNN0.jpg" style="width: 500px; height: 201px;">

SPECIFICATIONS

Interface

Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2~3 VDD P Power Voltage for digital circuit
4 NC No connection
5 Reset I Global reset pin
6 U/D I Vertical inversion
7 L/R I Horizontal inversion
8 STBYB I Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z
9 GND P Ground
10 RXCLKIN- I - LVDS differential data input
11 RXCLKIN+ I + LVDS differential data input
12 GND P Ground
13 RXIN0- I - LVDS differential data input
14 RXIN0+ I + LVDS differential data input
15 GND P Ground
16 RXIN1- I - LVDS differential data input
17 RXIN1+ I + LVDS differential data input
18 GND P Ground
19 RXIN2- I - LVDS differential clock input
20 RXIN2+ I + LVDS differential clock input
21 GND P Ground
22 RXIN3- I - LVDS differential data input
23 RXIN3+ I + LVDS differential data input
24 GND P Ground
25 SELB I 6bit/8bit mode selection
26 GND P Ground
27 AVDD P Power for Analog Circuit
28 GND P Ground
29 VGH P Gate ON Voltage
30~31 NC No connection
32 VGL P Gate off Voltage
33 GND P Ground
34 NC No connection
35~36 LED- P LED Cathode
37~38 NC No connection
39~40 LED+ P LED Anode

I: input, O: output, P: Power

General Specifications

Item Dimension Unit
Size 9.0 inch
Dot Matrix 1024 × RGB × 600(TFT) dots
Module dimension 211.1(W) × 126.5(H) × 5.7(D) mm
Active area 196.608 × 114.15 mm
Dot pitch 0.192 × 0.19025 mm
LCD type TFT, Normally White, Transmissive
Backlight Type LED, Normally White
Touch Panel Without touch panel
Surface Anti-Glare
 

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +85
Storage Temperature TST -30 +85

Electrical Characteristics

Item Symbol Min. Typ. Max. Unit
Supply Voltage VDD 3.0 3.3 3.6 V
VGH 22 23 24 V
VGL -9 -10 -11 V
AVDD 12.3 12.6 12.9 V
VCOM 5.6 5.8 6 V
Input signal voltage ViH 0.7 VDD - VDD V
ViL 0 - 0.3 VDD V
Current of power supply IDD - 23 - mA
IADD - 40 - mA
IGH - 0.5 - mA
IGL - 1.2 - mA
Ivcom   0.7 - mA